Main Parameter Table
ltem No.：PYS-PEG-U00300
Model No.：PYS-PEG-E00300
Output Waveform：Pure sine wave
Output Voltage：120V/60HZ
Power Output：300W
Battery Capacity：299.52Wh
Battery Model：3.6V 2600mAh (4S8P) Support 3C discharging, 1C charging
Battery Type：18650 lithium-ion cells (ternary lithium)
DC Output：1x Cigarette lighter 12V/10A
DC Outputs：1x Cigarette lighter+ 2x DC5525 (Sharing 12V/10A)
USB Outputs：USB2.0 5V 2.4A/USB QC3.0/PD 60W(Independence)
Charging Time：5~6H
Charging Voltage and Current：16.8V d.c. 3.8A(Support 12-28V)/ Solar Panel 18V 100W
LED Lighting：3w (Lighting、SOS、Flashing)
Ambient temperature：0℃~40℃
Discharge temperature：0℃~40℃
Storage Temperature：-10℃~65℃
Product Dimensions：L9.88*W5.43*H8.58 lnch
Net Weight：7.41 LB
Protection Functions：Input/output under-voltage, Input/output over-voltage,over-temperature,overload, short-circuit
CHARGING INSTRUCTIONS
The product can be charged in three modes, charging from the wall, charging from solar and charging in the car, with voltages ranging from 12V to 28VThe current cannot exceed 5 A. Same charging port DC 5521. We suggest using ours special adapters, using other chargers will damage the product.
1. Charging from the wall :
Connect the charger to the power supply and insert the DC 5521 male plug into the port, the portable energy storage power product DC 5521 was charged.
2. Charging from solar :
Choose 18V 100W solar panel, 22V open circuit voltage.Solar panel in the sun, then the solar panel DC 5521 male plug into the DC 5521 charging port, charge portable energy storage power products.
3. Charging in the car :
This product can be charged with a 12V car charger. Please start the vehicle before charging to prevent draining the car battery and prevent your vehicle from being unable to start.Meanwhile, please ensure that the car charger and the car cigarette lighter provide a good connection, and ensure that the car charger is fully inserted. In addition, if the vehicle is running on bumpy roads, it is forbidden to use the car charger in case it burns due to a poor connection. The company will not be responsible for any loss caused by non-standard operation.
When the product is charging, the LCD screen will show the power and charging time in real time. When fully charged, the charger will automatically stop charging.